- Ability to set antenna power
- ENABLE_EVENTS_AND_REPORTS for compatibility with Zebra FX9500/9600 readers
- Fixes for the RSSI filtering service
- Fixes for scenarios causing LLRP reader sessions to get stuck in a Loggingin state
Release Notes - Edge Server 3.8.0
Release Notes - Edge Server 3.8.0
The release notes for Edge Server 3.8.0 list the following items, but are a little sparse on details:
-
- Posts: 1
- Joined: Tue Apr 09, 2019 10:06 am
- Name: Deepak Kumar
- Organization: IRIS Software Pvt Ltd
Re: Release Notes - Edge Server 3.8.0
i am trying to configure FX7400 reader on Edge server 3.8.0 and reader is already configured at IP-address 172.16.15.48:5084.
I have run below commands on Edge server but getting no tags but tags are already placed on near antenna.
1.osgi> createreader LLRP IpAddress 172.16.15.48 Port 5084
Reader Created with ID LLRP_1
2.osgi> createsession LLRP_1
Session created: LLRP_1:1
3.osgi> createcommand LLRP-Configure
Command Configuration Created with ID LLRP_Configure_1
4.osgi> setproperties LLRP_Configure_1 TriggerType PUSH ROSpecID 1
Properties for Reader LLRP_Configure_1
TriggerType : PUSH
ROSpecID : 1
5.osgi> executecommand LLRP_1 1 LLRP_Configure_1 -1
Session not in processing state. Command will be executed when
session connects: LLRP_Configure_1 Command submitted.
6.osgi> createcommand LLRP-Push-Stop
Command Configuration Created with ID LLRP_Push_Stop_1
7.osgi> setproperties LLRP_Push_Stop_1 ROSpecID 1
Properties for Reader LLRP_Push_Stop_1 ROSpecID : 1
8.osgi> executecommand LLRP_1 1 LLRP_Push_Stop_1 -1
Session not in processing state. Command will be executed when session connects: LLRP_Push_Stop_1 Command submitted.
9.osgi> startsession LLRP_1 1
Getting error while run this command and also atcched the error screenshot.
10. osgi> save
Configuration Saved!
11.osgi> readers ID: LLRP_1
session (1): LLRPSession: 172.16.15.48:5084 (PROCESSING) Single-Shot Command(0): LLRP_Configure_1
12.osgi> currenttags LLRP_1
No Tags will be display.
PLease suggest what i missed it and let me know how to get tag reads by RIFIDI Edge Server 3.8 for FX7400 reader.
Thanks & Regards,
Deepak Kumar
I have run below commands on Edge server but getting no tags but tags are already placed on near antenna.
1.osgi> createreader LLRP IpAddress 172.16.15.48 Port 5084
Reader Created with ID LLRP_1
2.osgi> createsession LLRP_1
Session created: LLRP_1:1
3.osgi> createcommand LLRP-Configure
Command Configuration Created with ID LLRP_Configure_1
4.osgi> setproperties LLRP_Configure_1 TriggerType PUSH ROSpecID 1
Properties for Reader LLRP_Configure_1
TriggerType : PUSH
ROSpecID : 1
5.osgi> executecommand LLRP_1 1 LLRP_Configure_1 -1
Session not in processing state. Command will be executed when
session connects: LLRP_Configure_1 Command submitted.
6.osgi> createcommand LLRP-Push-Stop
Command Configuration Created with ID LLRP_Push_Stop_1
7.osgi> setproperties LLRP_Push_Stop_1 ROSpecID 1
Properties for Reader LLRP_Push_Stop_1 ROSpecID : 1
8.osgi> executecommand LLRP_1 1 LLRP_Push_Stop_1 -1
Session not in processing state. Command will be executed when session connects: LLRP_Push_Stop_1 Command submitted.
9.osgi> startsession LLRP_1 1
Getting error while run this command and also atcched the error screenshot.
10. osgi> save
Configuration Saved!
11.osgi> readers ID: LLRP_1
session (1): LLRPSession: 172.16.15.48:5084 (PROCESSING) Single-Shot Command(0): LLRP_Configure_1
12.osgi> currenttags LLRP_1
No Tags will be display.
PLease suggest what i missed it and let me know how to get tag reads by RIFIDI Edge Server 3.8 for FX7400 reader.
Thanks & Regards,
Deepak Kumar
- Attachments
-
- Error_RIFIDI.PNG (31.44 KiB) Viewed 5280 times
Re: Release Notes - Edge Server 3.8.0
This issue fixed in 3.8 RSSI service was related to LLRP readers
Link to issue that was reported
viewtopic.php?f=35&t=4706
Link to issue that was reported
viewtopic.php?f=35&t=4706
Who is online
Users browsing this forum: No registered users and 9 guests