About FX 7500 disconnect problem

Questions about developing the edge server core as well as applications

Moderators: Matt, kyle

Post Reply
gn00644368
Posts: 5
Joined: Tue May 10, 2016 9:30 pm

About FX 7500 disconnect problem

Post by gn00644368 » Sun Jul 24, 2016 9:28 pm

Hi,

I use FX 7500 and it has a feature :
" The FX7500 stores data in transition when it detects a network condition that prevents the reader from sending data. This applies to RFID tag data that the reader application is transmitting to the outbound TCP socket, and is no longer owned by the RFID application because it was sent to the network layer for transmission.
When the reader cannot queue RFID data in the outbound TCP socket when an LLRP connection is already established, it stores all outbound LLRP messages in the data protection queue. The queue can store up to 66,000 messages, which represents more than 5 minutes worth of data when reading 200 tags/second (the nominal data rate in DRM (dense reader mode) configuration). If the network is still unavailable when the data protection queue is full, the oldest messages are discarded to accommodate the most recent tag reports.
This feature can not be disabled and operates regardless of the physical network interface used, meaning RFID data over WiFi and Bluetooth is also protected. "

But when Rifidi connect FX 7500 for a while and FX7500 reading tag. Suddenly, FX 7500 can not connect internet but it still reading tags.
When Fx7500 reconnect Rifidi, it does not send tags have read before reconnect to Rifidi.

It's FX 7500 need set up some configuration, or Rifidi not support this feature?

Thx.

bppause
Posts: 434
Joined: Sat Oct 03, 2009 12:30 am
Organization: Pramari

Re: About FX 7500 disconnect problem

Post by bppause » Mon Jul 25, 2016 5:02 pm

Rifidi edge will act upon any tag readers/sensor data sent to the connection. So sounds like it could be a FX7500 configuration to ensure these tags are reported once it reconnects..

Also check with the vendor reader documentation if this is a configuration on the reader or something u can set via llrp..if u set in llrp u can set the configuration in set reader config llrp file found in the rifidi server home config folder ..ww pass the llrp reader config we connecting to a llrp reader

Post Reply

Who is online

Users browsing this forum: No registered users and 3 guests