I use FX 7500 and it has a feature :
" The FX7500 stores data in transition when it detects a network condition that prevents the reader from sending data. This applies to RFID tag data that the reader application is transmitting to the outbound TCP socket, and is no longer owned by the RFID application because it was sent to the network layer for transmission.
This feature can not be disabled and operates regardless of the physical network interface used, meaning RFID data over WiFi and Bluetooth is also protected. "When the reader cannot queue RFID data in the outbound TCP socket when an LLRP connection is already established, it stores all outbound LLRP messages in the data protection queue. The queue can store up to 66,000 messages, which represents more than 5 minutes worth of data when reading 200 tags/second (the nominal data rate in DRM (dense reader mode) configuration). If the network is still unavailable when the data protection queue is full, the oldest messages are discarded to accommodate the most recent tag reports.
But when Rifidi connect FX 7500 for a while and FX7500 reading tag. Suddenly, FX 7500 can not connect internet but it still reading tags.
When Fx7500 reconnect Rifidi, it does not send tags have read before reconnect to Rifidi.
It's FX 7500 need set up some configuration, or Rifidi not support this feature?
Thx.