Q : how to start multiple simulated readers at same time ?

All questions related to the usage of Rifidi TagStreamer

Moderators: Matt, kyle, Moderators

Post Reply
cooljeffrey
Posts: 3
Joined: Wed Aug 27, 2008 12:49 am

Q : how to start multiple simulated readers at same time ?

Post by cooljeffrey » Wed Aug 27, 2008 7:47 am

Hello,

Can I start multiple simulated readers and add tags to them at the same time ?
eg. a set of tags are associated with reader 1, another set of tags associated with reader 2, two readers are running and scanning their own tags simultaneously.

I wonder this is not same as the tags traveling through two or more readers, that way the tags will be read by one single reader at one time.

Thanks!

kyle
Posts: 220
Joined: Tue Apr 22, 2008 10:12 pm
Name: Kyle
Organization: Pramari
Location: Hartford, CT
Contact:

Re: Q : how to start multiple simulated readers at same time ?

Post by kyle » Wed Aug 27, 2008 10:33 am

cooljeffrey,

It is definitely possible to run two readers in parallel. To do this you need to define two scenarios where scenario1 contains reader1 and scneario2 contains reader2. A scenario is like a path that batches flow down. So you baiscally need two paths. Then in your testsuite, you need to add both scenarios, and the scenarios will run in parallel. I added an example streamer configuration to the wiki: http://wiki.rifidi.org/index.php/Tag_St ... #Dock_Door

-Kyle

Post Reply

Who is online

Users browsing this forum: No registered users and 5 guests