Hello,
Can I start multiple simulated readers and add tags to them at the same time ?
eg. a set of tags are associated with reader 1, another set of tags associated with reader 2, two readers are running and scanning their own tags simultaneously.
I wonder this is not same as the tags traveling through two or more readers, that way the tags will be read by one single reader at one time.
Thanks!
Q : how to start multiple simulated readers at same time ?
Moderators: Matt, kyle, Moderators
-
- Posts: 3
- Joined: Wed Aug 27, 2008 12:49 am
-
- Posts: 220
- Joined: Tue Apr 22, 2008 10:12 pm
- Name: Kyle
- Organization: Pramari
- Location: Hartford, CT
- Contact:
Re: Q : how to start multiple simulated readers at same time ?
cooljeffrey,
It is definitely possible to run two readers in parallel. To do this you need to define two scenarios where scenario1 contains reader1 and scneario2 contains reader2. A scenario is like a path that batches flow down. So you baiscally need two paths. Then in your testsuite, you need to add both scenarios, and the scenarios will run in parallel. I added an example streamer configuration to the wiki: http://wiki.rifidi.org/index.php/Tag_St ... #Dock_Door
-Kyle
It is definitely possible to run two readers in parallel. To do this you need to define two scenarios where scenario1 contains reader1 and scneario2 contains reader2. A scenario is like a path that batches flow down. So you baiscally need two paths. Then in your testsuite, you need to add both scenarios, and the scenarios will run in parallel. I added an example streamer configuration to the wiki: http://wiki.rifidi.org/index.php/Tag_St ... #Dock_Door
-Kyle
Who is online
Users browsing this forum: No registered users and 5 guests