Not able to connect to Alien Emulator reader

The Forum for Non-Technical questions

Moderators: Matt, kyle, Moderators

Post Reply
prasanth
Posts: 15
Joined: Wed Feb 03, 2016 3:34 am
Organization: CDAC

Not able to connect to Alien Emulator reader

Post by prasanth » Wed Feb 24, 2016 3:40 am

Hi
1. I am trying to connect to Emulator Alien reader. But not working out properly. Am following http://www.transcends.co/www/docs/Rifid ... de_3.2.pdf

2. "setproperties Alien_Push_Start_1 NotifyPort 54321" This command is giving error while executing. (Console error given below for reference).

3. org.rifidi.edge.sensors.CannotExecuteException: The GPI command may not have executed. This is the error showing. What does it mean

Please verify the console error and suggest a way out of this.

Code: Select all

osgi>  createreader Alien IpAddress 127.0.0.1 Port 20000
12:48:02,883  INFO org.rifidi.edge.daos.ReaderDAOImpl:167 - Reader bound:Alien_2
12:48:02,899  INFO org.rifidi.edge.sensors.SensorManagementServiceImpl:464 - Sensor bound:Alien_2
Reader Created with ID Alien_2

osgi>  createsession Alien_2
Session created: Alien_2:1

osgi> createcommand Alien-Push-Start
12:50:00,169  INFO org.rifidi.edge.daos.CommandDAOImpl:130 - Command Configuration Bound: Alien_Push_Start_1
Command Configuration Created with ID Alien_Push_Start_1

osgi> setproperties Alien_Push_Start_1 NotifyAddressPort 54321
Properties for Reader Alien_Push_Start_1
	NotifyAddressPort : 54321

osgi>  setproperties Alien_Push_Start_1 NotifyPort 54321
12:50:45,619  WARN org.rifidi.edge.configuration.RifidiService:196 - Unknown attribute: NotifyPort = 54321
12:50:45,620 ERROR org.rifidi.edge.configuration.DefaultConfigurationImpl:407 - Error when trying to set NotifyPort
Properties for Reader Alien_Push_Start_1

osgi>  setproperties Alien_Push_Start_1 NotifyAddressHost 127.0.0.1
Properties for Reader Alien_Push_Start_1
	NotifyAddressHost : 127.0.0.1

osgi>  executecommand Alien_2 1 Alien_Push_Start_1 -1
12:58:53,671  INFO org.rifidi.edge.sensors.sessions.AbstractSensorSession:244 - Session not in processing state. Command will be executed when session connects: Alien_Push_Start_1
Command submitted.

osgi> deletereader/Alien_1
gogo: CommandNotFoundException: Command not found: deletereader/Alien_1

osgi> deletereader Alien_1
13:00:46,140  INFO org.rifidi.edge.daos.ReaderDAOImpl:182 - Reader unbound:Alien_1
13:00:46,156  INFO org.rifidi.edge.sensors.SensorManagementServiceImpl:490 - Sensor unbound:Alien_1
Sensor with ID Alien_1 has been deleted

osgi> startsession Alien_2 1
Session Alien_2:1 started.
osgi> 13:01:19,878  INFO org.rifidi.edge.sensors.sessions.AbstractIPSensorSession:204 - Attempting to connect to : 127.0.0.1:20000
13:01:19,925  INFO org.rifidi.edge.sensors.sessions.AbstractIPSensorSession:282 - Session 1 on Alien_2 connected successfully to  127.0.0.1:20000
13:01:19,925  INFO org.rifidi.edge.sensors.sessions.AbstractSensorSession:328 - Session not in processing state. Command will be executed when session connects: Alien Keep Alive
13:01:19,972  INFO org.rifidi.edge.sensors.sessions.AbstractSensorSession:357 - Executing single shot command: Default Reset Command
13:01:19,972  INFO org.rifidi.edge.sensors.sessions.AbstractSensorSession:357 - Executing single shot command: Alien_Push_Start_1
13:01:19,972  INFO org.rifidi.edge.sensors.sessions.AbstractSensorSession:348 - Scheduling recurring command: Alien Keep Alive
13:01:19,972  INFO org.rifidi.edge.sensors.sessions.AbstractSensorSession:354 - Executing single shot command: AlienPropertyCommand
13:01:19,972  INFO org.rifidi.edge.sensors.sessions.AbstractServerSocketSensorSession:106 - Not starting server socket, since port < 1
13:01:19,972  INFO org.rifidi.edge.sensors.sessions.AbstractSensorSession:354 - Executing single shot command: AlienPropertyCommand
13:01:25,123 ERROR org.rifidi.edge.sensors.TimeoutCommand:70 - Timeout Exception on Sensor: Alien_2:IPSession: 127.0.0.1:20000 (PROCESSING), [Autonomous Session IPServerSession: 0 (CREATED)],[GPIO Session IPServerSession: 0 (CREATED)] Command: Alien Keep Alive
13:01:25,123  INFO org.rifidi.edge.sensors.sessions.AbstractSensorSession:197 - Queing command: CommandExecutor: Alien_Push_Start_1 IPSession: 127.0.0.1:20000 (CLOSED), [Autonomous Session IPServerSession: 0 (CREATED)],[GPIO Session IPServerSession: 0 (CREATED)]
13:01:25,123 ERROR org.rifidi.edge.sensors.sessions.ReadThread:90 - java.net.SocketException: Socket closed
13:01:25,138  INFO org.rifidi.edge.sensors.sessions.AbstractIPSensorSession:204 - Attempting to connect to : 127.0.0.1:20000
13:01:25,155  INFO org.rifidi.edge.sensors.sessions.AbstractServerSocketSensorSession:106 - Not starting server socket, since port < 1
13:01:25,155  WARN org.rifidi.edge.adapter.alien.commandobject.AlienGetCommandObject:72 - Something is wrong with the command: ***********************************************
*
* Alien Technology : RFID Reader
*
***********************************************

Username>
13:01:25,155  WARN org.rifidi.edge.adapter.alien.commands.internal.AlienPropertyCommand:77 - Alien Exception while executing command readerNumber***********************************************
*
* Alien Technology : RFID Reader
*
***********************************************

Username>
13:01:25,170  WARN org.rifidi.edge.adapter.alien.commandobject.AlienGetCommandObject:72 - Something is wrong with the command: 
13:01:25,170  WARN org.rifidi.edge.adapter.alien.commands.internal.AlienPropertyCommand:77 - Alien Exception while executing command readerVersion
13:01:25,170 FATAL org.rifidi.edge.adapter.alien.Alien9800ReaderSession:196 - SensorSession is not an alien sensorSession: Error: Invalid Username and/or Password

13:01:25,170  WARN org.rifidi.edge.adapter.alien.commandobject.AlienGetCommandObject:72 - Something is wrong with the command: Username>
13:01:25,170  WARN org.rifidi.edge.adapter.alien.commands.internal.AlienPropertyCommand:77 - Alien Exception while executing command readerTypeUsername>
13:01:25,186  WARN org.rifidi.edge.adapter.alien.commandobject.AlienGetCommandObject:72 - Something is wrong with the command: 
13:01:25,186  WARN org.rifidi.edge.adapter.alien.commands.internal.AlienPropertyCommand:77 - Alien Exception while executing command macAddress
13:01:25,186  WARN org.rifidi.edge.sensors.sessions.AbstractIPSensorSession:353 - Connection Failed 127.0.0.1:20000
13:01:25,186 ERROR org.rifidi.edge.sensors.sessions.ReadThread:90 - java.net.SocketException: Socket closed
13:01:25,186  INFO org.rifidi.edge.sensors.sessions.AbstractServerSocketSensorSession:106 - Not starting server socket, since port < 1
13:01:29,997  WARN org.rifidi.edge.sensors.sessions.AbstractSensorSession:298 - Timed out waiting on command 
java.util.concurrent.TimeoutException
	at java.util.concurrent.FutureTask.get(FutureTask.java:205)
	at org.rifidi.edge.sensors.sessions.AbstractSensorSession.submitAndBlock(AbstractSensorSession.java:280)
	at org.rifidi.edge.adapter.alien.Alien9800Reader.applyPropertyChanges(Alien9800Reader.java:711)
	at org.rifidi.edge.adapter.alien.Alien9800ReaderSession.getExternalInput(Alien9800ReaderSession.java:405)
	at org.rifidi.edge.adapter.alien.gpio.AlienGPIOSession.initialize(AlienGPIOSession.java:92)
	at org.rifidi.edge.adapter.alien.Alien9800ReaderSession$2.run(Alien9800ReaderSession.java:162)
	at java.lang.Thread.run(Thread.java:745)
org.rifidi.edge.sensors.CannotExecuteException: The GPI command may not have executed
	at org.rifidi.edge.adapter.alien.Alien9800ReaderSession.getExternalInput(Alien9800ReaderSession.java:410)
	at org.rifidi.edge.adapter.alien.gpio.AlienGPIOSession.initialize(AlienGPIOSession.java:92)
	at org.rifidi.edge.adapter.alien.Alien9800ReaderSession$2.run(Alien9800ReaderSession.java:162)
	at java.lang.Thread.run(Thread.java:745)13:01:29,997  INFO org.rifidi.edge.sensors.sessions.AbstractSensorSession:328 - Session not in processing state. Command will be executed when session connects: 
13:01:29,997  WARN org.rifidi.edge.sensors.sessions.AbstractSensorSession:288 - Cannot wait on command  because the session is not in the processing state
13:01:29,997  INFO org.rifidi.edge.sensors.sessions.AbstractSensorSession:328 - Session not in processing state. Command will be executed when session connects: 
13:01:29,997  WARN org.rifidi.edge.sensors.sessions.AbstractSensorSession:288 - Cannot wait on command  because the session is not in the processing state
13:01:29,997  WARN org.rifidi.edge.adapter.alien.Alien9800ReaderSession:166 - Cannot connect Alien GPIO Session: [GPIO Session IPServerSession: 0 (CREATED)]
13:01:29,997  WARN org.rifidi.edge.adapter.alien.Alien9800ReaderSession:166 - Cannot connect Alien GPIO Session: [GPIO Session IPServerSession: 0 (CREATED)]
13:01:29,997  WARN org.rifidi.edge.adapter.alien.Alien9800ReaderSession:166 - Cannot connect Alien GPIO Session: [GPIO Session IPServerSession: 0 (CREATED)]

org.rifidi.edge.sensors.CannotExecuteException: The GPI command may not have executed
	at org.rifidi.edge.adapter.alien.Alien9800ReaderSession.getExternalInput(Alien9800ReaderSession.java:410)
	at org.rifidi.edge.adapter.alien.gpio.AlienGPIOSession.initialize(AlienGPIOSession.java:92)
	at org.rifidi.edge.adapter.alien.Alien9800ReaderSession$2.run(Alien9800ReaderSession.java:162)
	at java.lang.Thread.run(Thread.java:745)
org.rifidi.edge.sensors.CannotExecuteException: The GPI command may not have executed
	at org.rifidi.edge.adapter.alien.Alien9800ReaderSession.getExternalInput(Alien9800ReaderSession.java:410)
	at org.rifidi.edge.adapter.alien.gpio.AlienGPIOSession.initialize(AlienGPIOSession.java:92)
	at org.rifidi.edge.adapter.alien.Alien9800ReaderSession$2.run(Alien9800ReaderSession.java:162)
	at java.lang.Thread.run(Thread.java:745)
13:01:30,201  WARN org.rifidi.edge.adapter.alien.commandobject.AlienGetCommandObject:59 - Timeout when waiting for the maxantenna command to execute
13:01:30,201 ERROR org.rifidi.edge.sensors.TimeoutCommand:70 - Timeout Exception on Sensor: Alien_2:IPSession: 127.0.0.1:20000 (CLOSED), [Autonomous Session IPServerSession: 0 (CREATED)],[GPIO Session IPServerSession: 0 (CREATED)] Command: 
13:01:30,201  INFO org.rifidi.edge.sensors.sessions.AbstractIPSensorSession:204 - Attempting to connect to : 127.0.0.1:20000
13:01:30,201  WARN org.rifidi.edge.adapter.alien.commandobject.AlienGetCommandObject:72 - Something is wrong with the command: ***********************************************
*
* Alien Technology : RFID Reader
*
***********************************************

Username>
13:01:30,216  WARN org.rifidi.edge.adapter.alien.commands.internal.AlienPropertyCommand:77 - Alien Exception while executing command externalinput***********************************************
*
* Alien Technology : RFID Reader
*
***********************************************

Username>
13:01:30,216  INFO org.rifidi.edge.sensors.sessions.AbstractIPSensorSession:282 - Session 1 on Alien_2 connected successfully to  127.0.0.1:20000
13:01:30,216  INFO org.rifidi.edge.sensors.sessions.AbstractSensorSession:328 - Session not in processing state. Command will be executed when session connects: Alien Keep Alive
13:01:30,216  INFO org.rifidi.edge.sensors.sessions.AbstractSensorSession:357 - Executing single shot command: Default Reset Command
13:01:30,216  INFO org.rifidi.edge.sensors.sessions.AbstractSensorSession:357 - Executing single shot command: Alien_Push_Start_1
13:01:30,216  INFO org.rifidi.edge.sensors.sessions.AbstractSensorSession:354 - Executing single shot command: AlienPropertyCommand
13:01:30,216  INFO org.rifidi.edge.sensors.sessions.AbstractSensorSession:354 - Executing single shot command: AlienPropertyCommand
13:01:30,216  INFO org.rifidi.edge.sensors.sessions.AbstractSensorSession:348 - Scheduling recurring command: Alien Keep Alive
13:01:30,232  INFO org.rifidi.edge.sensors.sessions.AbstractServerSocketSensorSession:106 - Not starting server socket, since port < 1
13:01:30,232  INFO org.rifidi.edge.sensors.sessions.AbstractSensorSession:354 - Executing single shot command: AlienPropertyCommand
13:01:35,303 ERROR org.rifidi.edge.sensors.TimeoutCommand:70 - Timeout Exception on Sensor: Alien_2:IPSession: 127.0.0.1:20000 (PROCESSING), [Autonomous Session IPServerSession: 0 (CREATED)],[GPIO Session IPServerSession: 0 (CREATED)] Command: Alien Keep Alive
13:01:35,303  INFO org.rifidi.edge.sensors.sessions.AbstractSensorSession:197 - Queing command: CommandExecutor: Alien_Push_Start_1 IPSession: 127.0.0.1:20000 (CLOSED), [Autonomous Session IPServerSession: 0 (CREATED)],[GPIO Session IPServerSession: 0 (CREATED)]
13:01:35,303 ERROR org.rifidi.edge.sensors.sessions.ReadThread:90 - java.net.SocketException: Socket closed
13:01:35,318  INFO org.rifidi.edge.sensors.sessions.AbstractIPSensorSession:204 - Attempting to connect to : 127.0.0.1:20000
13:01:35,335  INFO org.rifidi.edge.sensors.sessions.AbstractServerSocketSensorSession:106 - Not starting server socket, since port < 1
13:01:35,335  WARN org.rifidi.edge.adapter.alien.commandobject.AlienGetCommandObject:72 - Something is wrong with the command: ***********************************************
*
* Alien Technology : RFID Reader
*
***********************************************

Username>
13:01:35,335  WARN org.rifidi.edge.adapter.alien.commands.internal.AlienPropertyCommand:77 - Alien Exception while executing command externalinput***********************************************
*
* Alien Technology : RFID Reader
*
***********************************************

Username>
13:01:35,335  INFO org.rifidi.edge.sensors.sessions.AbstractServerSocketSensorSession:106 - Not starting server socket, since port < 1
org.rifidi.edge.sensors.CannotExecuteException: The GPI command may not have executed
	at org.rifidi.edge.adapter.alien.Alien9800ReaderSession.getExternalInput(Alien9800ReaderSession.java:410)
	at org.rifidi.edge.adapter.alien.gpio.AlienGPIOSession.initialize(AlienGPIOSession.java:92)
	at org.rifidi.edge.adapter.alien.Alien9800ReaderSession$2.run(Alien9800ReaderSession.java:162)
	at java.lang.Thread.run(Thread.java:745)
13:01:35,335  INFO org.rifidi.edge.sensors.sessions.AbstractSensorSession:328 - Session not in processing state. Command will be executed when session connects: 
13:01:35,335  WARN org.rifidi.edge.sensors.sessions.AbstractSensorSession:288 - Cannot wait on command  because the session is not in the processing state
13:01:35,335  WARN org.rifidi.edge.adapter.alien.Alien9800ReaderSession:166 - Cannot connect Alien GPIO Session: [GPIO Session IPServerSession: 0 (CREATED)]
13:01:40,359  WARN org.rifidi.edge.adapter.alien.Alien9800ReaderSession:221 - Timeout when logging in
13:01:40,359  WARN org.rifidi.edge.sensors.sessions.AbstractIPSensorSession:278 - Unable to connect during login: java.io.IOException: java.util.concurrent.TimeoutException: Timed out while waiting for a response
13:01:40,359 ERROR org.rifidi.edge.sensors.sessions.ReadThread:90 - java.net.SocketException: Socket closed
13:01:40,359  INFO org.rifidi.edge.sensors.sessions.AbstractIPSensorSession:204 - Attempting to connect to : 127.0.0.1:20000
13:01:40,396  INFO org.rifidi.edge.sensors.sessions.AbstractIPSensorSession:282 - Session 1 on Alien_2 connected successfully to  127.0.0.1:20000
13:01:40,397  INFO org.rifidi.edge.sensors.sessions.AbstractSensorSession:328 - Session not in processing state. Command will be executed when session connects: Alien Keep Alive
13:01:40,398  INFO org.rifidi.edge.sensors.sessions.AbstractSensorSession:357 - Executing single shot command: Default Reset Command
13:01:40,398  INFO org.rifidi.edge.sensors.sessions.AbstractSensorSession:357 - Executing single shot command: Alien_Push_Start_1
13:01:40,398  INFO org.rifidi.edge.sensors.sessions.AbstractSensorSession:354 - Executing single shot command: AlienPropertyCommand
13:01:40,398  INFO org.rifidi.edge.sensors.sessions.AbstractSensorSession:348 - Scheduling recurring command: Alien Keep Alive
13:01:40,398  INFO org.rifidi.edge.sensors.sessions.AbstractIPSensorSession:282 - Session 1 on Alien_2 connected successfully to  127.0.0.1:20000
13:01:40,398  INFO org.rifidi.edge.sensors.sessions.AbstractSensorSession:348 - Scheduling recurring command: Alien Keep Alive
13:01:40,398  INFO org.rifidi.edge.sensors.sessions.AbstractServerSocketSensorSession:106 - Not starting server socket, since port < 1
13:01:40,414  WARN org.rifidi.edge.sensors.sessions.AbstractIPSensorSession:296 - Executor was already active! 
13:01:40,414  INFO org.rifidi.edge.sensors.sessions.AbstractSensorSession:357 - Executing single shot command: Default Reset Command
13:01:40,414  INFO org.rifidi.edge.sensors.sessions.AbstractServerSocketSensorSession:106 - Not starting server socket, since port < 1
13:01:40,430  INFO org.rifidi.edge.sensors.sessions.AbstractSensorSession:354 - Executing single shot command: AlienPropertyCommand
13:01:45,468 ERROR org.rifidi.edge.sensors.TimeoutCommand:70 - Timeout Exception on Sensor: Alien_2:IPSession: 127.0.0.1:20000 (PROCESSING), [Autonomous Session IPServerSession: 0 (CREATED)],[GPIO Session IPServerSession: 0 (CREATED)] Command: Alien Keep Alive
13:01:45,471  INFO org.rifidi.edge.sensors.sessions.AbstractSensorSession:197 - Queing command: CommandExecutor: Alien_Push_Start_1 IPSession: 127.0.0.1:20000 (CLOSED), [Autonomous Session IPServerSession: 0 (CREATED)],[GPIO Session IPServerSession: 0 (CREATED)]
13:01:45,471 ERROR org.rifidi.edge.sensors.sessions.ReadThread:90 - java.net.SocketException: Socket closed
13:01:45,487  INFO org.rifidi.edge.sensors.sessions.AbstractServerSocketSensorSession:106 - Not starting server socket, since port < 1
13:01:45,487  INFO org.rifidi.edge.sensors.sessions.AbstractServerSocketSensorSession:106 - Not starting server socket, since port < 1
13:01:45,487  INFO org.rifidi.edge.sensors.sessions.AbstractIPSensorSession:204 - Attempting to connect to : 127.0.0.1:20000
13:01:45,518  WARN org.rifidi.edge.adapter.alien.commandobject.AlienGetCommandObject:72 - Something is wrong with the command: 
13:01:45,518  WARN org.rifidi.edge.adapter.alien.commands.internal.AlienPropertyCommand:77 - Alien Exception while executing command externalinput
13:01:45,518  INFO org.rifidi.edge.sensors.sessions.AbstractServerSocketSensorSession:106 - Not starting server socket, since port < 1
org.rifidi.edge.sensors.CannotExecuteException: The GPI command may not have executed
	at org.rifidi.edge.adapter.alien.Alien9800ReaderSession.getExternalInput(Alien9800ReaderSession.java:410)
	at org.rifidi.edge.adapter.alien.gpio.AlienGPIOSession.initialize(AlienGPIOSession.java:92)
	at org.rifidi.edge.adapter.alien.Alien9800ReaderSession$2.run(Alien9800ReaderSession.java:162)
	at java.lang.Thread.run(Thread.java:745)
13:01:45,518  INFO org.rifidi.edge.sensors.sessions.AbstractSensorSession:328 - Session not in processing state. Command will be executed when session connects: 
13:01:45,518  WARN org.rifidi.edge.sensors.sessions.AbstractSensorSession:288 - Cannot wait on command  because the session is not in the processing state
13:01:45,518  WARN org.rifidi.edge.adapter.alien.Alien9800ReaderSession:166 - Cannot connect Alien GPIO Session: [GPIO Session IPServerSession: 0 (CREATED)]
13:01:45,518  INFO org.rifidi.edge.sensors.sessions.AbstractSensorSession:328 - Session not in processing state. Command will be executed when session connects: 
13:01:45,518  WARN org.rifidi.edge.sensors.sessions.AbstractSensorSession:288 - Cannot wait on command  because the session is not in the processing state
13:01:45,518  WARN org.rifidi.edge.adapter.alien.Alien9800ReaderSession:166 - Cannot connect Alien GPIO Session: [GPIO Session IPServerSession: 0 (CREATED)]
13:01:45,518  INFO org.rifidi.edge.sensors.sessions.AbstractSensorSession:328 - Session not in processing state. Command will be executed when session connects: 
13:01:45,518  WARN org.rifidi.edge.sensors.sessions.AbstractSensorSession:288 - Cannot wait on command  because the session is not in the processing state
13:01:45,518  WARN org.rifidi.edge.adapter.alien.Alien9800ReaderSession:166 - Cannot connect Alien GPIO Session: [GPIO Session IPServerSession: 0 (CREATED)]
org.rifidi.edge.sensors.CannotExecuteException: The GPI command may not have executed
	at org.rifidi.edge.adapter.alien.Alien9800ReaderSession.getExternalInput(Alien9800ReaderSession.java:410)
	at org.rifidi.edge.adapter.alien.gpio.AlienGPIOSession.initialize(AlienGPIOSession.java:92)
	at org.rifidi.edge.adapter.alien.Alien9800ReaderSession$2.run(Alien9800ReaderSession.java:162)
	at java.lang.Thread.run(Thread.java:745)
org.rifidi.edge.sensors.CannotExecuteException: The GPI command may not have executed
	at org.rifidi.edge.adapter.alien.Alien9800ReaderSession.getExternalInput(Alien9800ReaderSession.java:410)
	at org.rifidi.edge.adapter.alien.gpio.AlienGPIOSession.initialize(AlienGPIOSession.java:92)
	at org.rifidi.edge.adapter.alien.Alien9800ReaderSession$2.run(Alien9800ReaderSession.java:162)
	at java.lang.Thread.run(Thread.java:745)
13:01:50,529  WARN org.rifidi.edge.adapter.alien.Alien9800ReaderSession:221 - Timeout when logging in
13:01:50,529  WARN org.rifidi.edge.sensors.sessions.AbstractIPSensorSession:278 - Unable to connect during login: java.io.IOException: java.util.concurrent.TimeoutException: Timed out while waiting for a response
13:01:50,529 ERROR org.rifidi.edge.sensors.sessions.ReadThread:90 - java.net.SocketException: Socket closed
13:01:50,529  INFO org.rifidi.edge.sensors.sessions.AbstractIPSensorSession:204 - Attempting to connect to : 127.0.0.1:20000
13:01:50,577  INFO org.rifidi.edge.sensors.sessions.AbstractIPSensorSession:282 - Session 1 on Alien_2 connected successfully to  127.0.0.1:20000
13:01:50,577  INFO org.rifidi.edge.sensors.sessions.AbstractSensorSession:328 - Session not in processing state. Command will be executed when session connects: Alien Keep Alive
13:01:50,577  INFO org.rifidi.edge.sensors.sessions.AbstractSensorSession:357 - Executing single shot command: Default Reset Command
13:01:50,577  INFO org.rifidi.edge.sensors.sessions.AbstractSensorSession:357 - Executing single shot command: Alien_Push_Start_1
13:01:50,577  INFO org.rifidi.edge.sensors.sessions.AbstractSensorSession:354 - Executing single shot command: AlienPropertyCommand
13:01:50,577  INFO org.rifidi.edge.sensors.sessions.AbstractSensorSession:354 - Executing single shot command: AlienPropertyCommand
13:01:50,577  INFO org.rifidi.edge.sensors.sessions.AbstractSensorSession:354 - Executing single shot command: AlienPropertyCommand
13:01:50,577  INFO org.rifidi.edge.sensors.sessions.AbstractSensorSession:348 - Scheduling recurring command: Alien Keep Alive
13:01:50,577  INFO org.rifidi.edge.sensors.sessions.AbstractIPSensorSession:282 - Session 1 on Alien_2 connected successfully to  127.0.0.1:20000
13:01:50,577  INFO org.rifidi.edge.sensors.sessions.AbstractSensorSession:348 - Scheduling recurring command: Alien Keep Alive
13:01:50,577  INFO org.rifidi.edge.sensors.sessions.AbstractSensorSession:354 - Executing single shot command: AlienPropertyCommand
13:01:50,577  INFO org.rifidi.edge.sensors.sessions.AbstractServerSocketSensorSession:106 - Not starting server socket, since port < 1
13:01:50,592  WARN org.rifidi.edge.sensors.sessions.AbstractIPSensorSession:296 - Executor was already active! 
13:01:50,592  INFO org.rifidi.edge.sensors.sessions.AbstractSensorSession:357 - Executing single shot command: Default Reset Command
13:01:50,608  INFO org.rifidi.edge.sensors.sessions.AbstractServerSocketSensorSession:106 - Not starting server socket, since port < 1
13:01:55,647 ERROR org.rifidi.edge.sensors.TimeoutCommand:70 - Timeout Exception on Sensor: Alien_2:IPSession: 127.0.0.1:20000 (PROCESSING), [Autonomous Session IPServerSession: 0 (CREATED)],[GPIO Session IPServerSession: 0 (CREATED)] Command: Alien Keep Alive
13:01:55,647  INFO org.rifidi.edge.sensors.sessions.AbstractSensorSession:197 - Queing command: CommandExecutor: Alien_Push_Start_1 IPSession: 127.0.0.1:20000 (CLOSED), [Autonomous Session IPServerSession: 0 (CREATED)],[GPIO Session IPServerSession: 0 (CREATED)]
13:01:55,647 ERROR org.rifidi.edge.sensors.sessions.ReadThread:90 - java.net.SocketException: Socket closed
13:01:55,662  INFO org.rifidi.edge.sensors.sessions.AbstractIPSensorSession:204 - Attempting to connect to : 127.0.0.1:20000
13:01:55,679  INFO org.rifidi.edge.sensors.sessions.AbstractServerSocketSensorSession:106 - Not starting server socket, since port < 1
13:01:55,679  WARN org.rifidi.edge.adapter.alien.commandobject.AlienGetCommandObject:72 - Something is wrong with the command: 
13:01:55,679  WARN org.rifidi.edge.adapter.alien.commands.internal.AlienPropertyCommand:77 - Alien Exception while executing command externalinput
13:01:55,679  INFO org.rifidi.edge.sensors.sessions.AbstractServerSocketSensorSession:106 - Not starting server socket, since port < 1
org.rifidi.edge.sensors.CannotExecuteException: The GPI command may not have executed
	at org.rifidi.edge.adapter.alien.Alien9800ReaderSession.getExternalInput(Alien9800ReaderSession.java:410)
	at org.rifidi.edge.adapter.alien.gpio.AlienGPIOSession.initialize(AlienGPIOSession.java:92)
	at org.rifidi.edge.adapter.alien.Alien9800ReaderSession$2.run(Alien9800ReaderSession.java:162)
	at java.lang.Thread.run(Thread.java:745)
13:01:55,679  INFO org.rifidi.edge.sensors.sessions.AbstractSensorSession:328 - Session not in processing state. Command will be executed when session connects: 
13:01:55,679  WARN org.rifidi.edge.sensors.sessions.AbstractSensorSession:288 - Cannot wait on command  because the session is not in the processing state
13:01:55,679  WARN org.rifidi.edge.adapter.alien.Alien9800ReaderSession:166 - Cannot connect Alien GPIO Session: [GPIO Session IPServerSession: 0 (CREATED)]
13:01:55,679  INFO org.rifidi.edge.sensors.sessions.AbstractServerSocketSensorSession:106 - Not starting server socket, since port < 1
13:01:55,679  INFO org.rifidi.edge.sensors.sessions.AbstractSensorSession:328 - Session not in processing state. Command will be executed when session connects: 
13:01:55,679  WARN org.rifidi.edge.sensors.sessions.AbstractSensorSession:288 - Cannot wait on command  because the session is not in the processing state
13:01:55,679  WARN org.rifidi.edge.adapter.alien.Alien9800ReaderSession:166 - Cannot connect Alien GPIO Session: [GPIO Session IPServerSession: 0 (CREATED)]
13:01:55,679  INFO org.rifidi.edge.sensors.sessions.AbstractSensorSession:328 - Session not in processing state. Command will be executed when session connects: 
13:01:55,679  WARN org.rifidi.edge.sensors.sessions.AbstractSensorSession:288 - Cannot wait on command  because the session is not in the processing state
13:01:55,679  WARN org.rifidi.edge.adapter.alien.Alien9800ReaderSession:166 - Cannot connect Alien GPIO Session: [GPIO Session IPServerSession: 0 (CREATED)]
org.rifidi.edge.sensors.CannotExecuteException: The GPI command may not have executed
	at org.rifidi.edge.adapter.alien.Alien9800ReaderSession.getExternalInput(Alien9800ReaderSession.java:410)
	at org.rifidi.edge.adapter.alien.gpio.AlienGPIOSession.initialize(AlienGPIOSession.java:92)
	at org.rifidi.edge.adapter.alien.Alien9800ReaderSession$2.run(Alien9800ReaderSession.java:162)
	at java.lang.Thread.run(Thread.java:745)
org.rifidi.edge.sensors.CannotExecuteException: The GPI command may not have executed
	at org.rifidi.edge.adapter.alien.Alien9800ReaderSession.getExternalInput(Alien9800ReaderSession.java:410)
	at org.rifidi.edge.adapter.alien.gpio.AlienGPIOSession.initialize(AlienGPIOSession.java:92)
	at org.rifidi.edge.adapter.alien.Alien9800ReaderSession$2.run(Alien9800ReaderSession.java:162)
	at java.lang.Thread.run(Thread.java:745)
13:02:00,693  WARN org.rifidi.edge.adapter.alien.Alien9800ReaderSession:221 - Timeout when logging in
13:02:00,693  WARN org.rifidi.edge.sensors.sessions.AbstractIPSensorSession:278 - Unable to connect during login: java.io.IOException: java.util.concurrent.TimeoutException: Timed out while waiting for a response
13:02:00,693 ERROR org.rifidi.edge.sensors.sessions.ReadThread:90 - java.net.SocketException: Socket closed
13:02:00,709  INFO org.rifidi.edge.sensors.sessions.AbstractIPSensorSession:204 - Attempting to connect to : 127.0.0.1:20000
13:02:00,757  INFO org.rifidi.edge.sensors.sessions.AbstractIPSensorSession:282 - Session 1 on Alien_2 connected successfully to  127.0.0.1:20000
13:02:00,757  INFO org.rifidi.edge.sensors.sessions.AbstractSensorSession:328 - Session not in processing state. Command will be executed when session connects: Alien Keep Alive
13:02:00,757  INFO org.rifidi.edge.sensors.sessions.AbstractSensorSession:357 - Executing single shot command: Default Reset Command
13:02:00,757  INFO org.rifidi.edge.sensors.sessions.AbstractSensorSession:357 - Executing single shot command: Alien_Push_Start_1
13:02:00,757  INFO org.rifidi.edge.sensors.sessions.AbstractSensorSession:354 - Executing single shot command: AlienPropertyCommand
13:02:00,757  INFO org.rifidi.edge.sensors.sessions.AbstractSensorSession:354 - Executing single shot command: AlienPropertyCommand
13:02:00,757  INFO org.rifidi.edge.sensors.sessions.AbstractSensorSession:354 - Executing single shot command: AlienPropertyCommand
13:02:00,757  INFO org.rifidi.edge.sensors.sessions.AbstractSensorSession:348 - Scheduling recurring command: Alien Keep Alive
13:02:00,757  INFO org.rifidi.edge.sensors.sessions.AbstractIPSensorSession:282 - Session 1 on Alien_2 connected successfully to  127.0.0.1:20000
13:02:00,757  INFO org.rifidi.edge.sensors.sessions.AbstractSensorSession:348 - Scheduling recurring command: Alien Keep Alive
13:02:00,757  INFO org.rifidi.edge.sensors.sessions.AbstractSensorSession:354 - Executing single shot command: AlienPropertyCommand
13:02:00,757  INFO org.rifidi.edge.sensors.sessions.AbstractServerSocketSensorSession:106 - Not starting server socket, since port < 1
13:02:00,772  WARN org.rifidi.edge.sensors.sessions.AbstractIPSensorSession:296 - Executor was already active! 
13:02:00,772  INFO org.rifidi.edge.sensors.sessions.AbstractSensorSession:357 - Executing single shot command: Default Reset Command
13:02:00,772  INFO org.rifidi.edge.sensors.sessions.AbstractServerSocketSensorSession:106 - Not starting server socket, since port < 1
13:02:05,828 ERROR org.rifidi.edge.sensors.TimeoutCommand:70 - Timeout Exception on Sensor: Alien_2:IPSession: 127.0.0.1:20000 (PROCESSING), [Autonomous Session IPServerSession: 0 (CREATED)],[GPIO Session IPServerSession: 0 (CREATED)] Command: Alien Keep Alive
13:02:05,844  INFO org.rifidi.edge.sensors.sessions.AbstractSensorSession:197 - Queing command: CommandExecutor: Alien_Push_Start_1 IPSession: 127.0.0.1:20000 (CLOSED), [Autonomous Session IPServerSession: 0 (CREATED)],[GPIO Session IPServerSession: 0 (CREATED)]
13:02:05,844 ERROR org.rifidi.edge.sensors.sessions.ReadThread:90 - java.net.SocketException: Socket closed
13:02:05,860  INFO org.rifidi.edge.sensors.sessions.AbstractIPSensorSession:204 - Attempting to connect to : 127.0.0.1:20000
13:02:05,860  INFO org.rifidi.edge.sensors.sessions.AbstractServerSocketSensorSession:106 - Not starting server socket, since port < 1
13:02:05,876  INFO org.rifidi.edge.sensors.sessions.AbstractServerSocketSensorSession:106 - Not starting server socket, since port < 1
13:02:05,876  WARN org.rifidi.edge.adapter.alien.commandobject.AlienGetCommandObject:72 - Something is wrong with the command: 
13:02:05,876  WARN org.rifidi.edge.adapter.alien.commands.internal.AlienPropertyCommand:77 - Alien Exception while executing command externalinput
13:02:05,876  INFO org.rifidi.edge.sensors.sessions.AbstractServerSocketSensorSession:106 - Not starting server socket, since port < 1
13:02:05,876  INFO org.rifidi.edge.sensors.sessions.AbstractSensorSession:328 - Session not in processing state. Command will be executed when session connects: 
13:02:05,876  WARN org.rifidi.edge.sensors.sessions.AbstractSensorSession:288 - Cannot wait on command  because the session is not in the processing state
13:02:05,876  WARN org.rifidi.edge.adapter.alien.Alien9800ReaderSession:166 - Cannot connect Alien GPIO Session: [GPIO Session IPServerSession: 0 (CREATED)]
org.rifidi.edge.sensors.CannotExecuteException: The GPI command may not have executed
	at org.rifidi.edge.adapter.alien.Alien9800ReaderSession.getExternalInput(Alien9800ReaderSession.java:410)
	at org.rifidi.edge.adapter.alien.gpio.AlienGPIOSession.initialize(AlienGPIOSession.java:92)
	at org.rifidi.edge.adapter.alien.Alien9800ReaderSession$2.run(Alien9800ReaderSession.java:162)
	at java.lang.Thread.run(Thread.java:745)
13:02:05,876  INFO org.rifidi.edge.sensors.sessions.AbstractSensorSession:328 - Session not in processing state. Command will be executed when session connects: 
13:02:05,876  WARN org.rifidi.edge.sensors.sessions.AbstractSensorSession:288 - Cannot wait on command  because the session is not in the processing state
13:02:05,876  WARN org.rifidi.edge.adapter.alien.Alien9800ReaderSession:166 - Cannot connect Alien GPIO Session: [GPIO Session IPServerSession: 0 (CREATED)]
13:02:05,876  INFO org.rifidi.edge.sensors.sessions.AbstractSensorSession:328 - Session not in processing state. Command will be executed when session connects: 
13:02:05,876  WARN org.rifidi.edge.sensors.sessions.AbstractSensorSession:288 - Cannot wait on command  because the session is not in the processing state
13:02:05,876  WARN org.rifidi.edge.adapter.alien.Alien9800ReaderSession:166 - Cannot connect Alien GPIO Session: [GPIO Session IPServerSession: 0 (CREATED)]
org.rifidi.edge.sensors.CannotExecuteException: The GPI command may not have executed
	at org.rifidi.edge.adapter.alien.Alien9800ReaderSession.getExternalInput(Alien9800ReaderSession.java:410)
	at org.rifidi.edge.adapter.alien.gpio.AlienGPIOSession.initialize(AlienGPIOSession.java:92)
	at org.rifidi.edge.adapter.alien.Alien9800ReaderSession$2.run(Alien9800ReaderSession.java:162)
	at java.lang.Thread.run(Thread.java:745)
org.rifidi.edge.sensors.CannotExecuteException: The GPI command may not have executed
	at org.rifidi.edge.adapter.alien.Alien9800ReaderSession.getExternalInput(Alien9800ReaderSession.java:410)
	at org.rifidi.edge.adapter.alien.gpio.AlienGPIOSession.initialize(AlienGPIOSession.java:92)
	at org.rifidi.edge.adapter.alien.Alien9800ReaderSession$2.run(Alien9800ReaderSession.java:162)
	at java.lang.Thread.run(Thread.java:745)
13:02:10,895  WARN org.rifidi.edge.adapter.alien.Alien9800ReaderSession:221 - Timeout when logging in
13:02:10,895  WARN org.rifidi.edge.sensors.sessions.AbstractIPSensorSession:278 - Unable to connect during login: java.io.IOException: java.util.concurrent.TimeoutException: Timed out while waiting for a response
13:02:10,895 ERROR org.rifidi.edge.sensors.sessions.ReadThread:90 - java.net.SocketException: Socket closed
13:02:10,895  INFO org.rifidi.edge.sensors.sessions.AbstractIPSensorSession:204 - Attempting to connect to : 127.0.0.1:20000
13:02:10,927  INFO org.rifidi.edge.sensors.sessions.AbstractIPSensorSession:282 - Session 1 on Alien_2 connected successfully to  127.0.0.1:20000
13:02:10,927  INFO org.rifidi.edge.sensors.sessions.AbstractSensorSession:328 - Session not in processing state. Command will be executed when session connects: Alien Keep Alive
13:02:10,927  INFO org.rifidi.edge.sensors.sessions.AbstractSensorSession:357 - Executing single shot command: Default Reset Command
13:02:10,927  INFO org.rifidi.edge.sensors.sessions.AbstractSensorSession:357 - Executing single shot command: Alien_Push_Start_1
13:02:10,927  INFO org.rifidi.edge.sensors.sessions.AbstractSensorSession:354 - Executing single shot command: AlienPropertyCommand
13:02:10,927  INFO org.rifidi.edge.sensors.sessions.AbstractSensorSession:354 - Executing single shot command: AlienPropertyCommand
13:02:10,927  INFO org.rifidi.edge.sensors.sessions.AbstractSensorSession:354 - Executing single shot command: AlienPropertyCommand
13:02:10,927  INFO org.rifidi.edge.sensors.sessions.AbstractSensorSession:348 - Scheduling recurring command: Alien Keep Alive
13:02:10,927  INFO org.rifidi.edge.sensors.sessions.AbstractIPSensorSession:282 - Session 1 on Alien_2 connected successfully to  127.0.0.1:20000
13:02:10,927  INFO org.rifidi.edge.sensors.sessions.AbstractSensorSession:348 - Scheduling recurring command: Alien Keep Alive
13:02:10,927  INFO org.rifidi.edge.sensors.sessions.AbstractSensorSession:354 - Executing single shot command: AlienPropertyCommand
13:02:10,927  INFO org.rifidi.edge.sensors.sessions.AbstractServerSocketSensorSession:106 - Not starting server socket, since port < 1
13:02:10,927  WARN org.rifidi.edge.sensors.sessions.AbstractIPSensorSession:296 - Executor was already active! 
13:02:10,927  INFO org.rifidi.edge.sensors.sessions.AbstractSensorSession:357 - Executing single shot command: Default Reset Command
13:02:10,927  INFO org.rifidi.edge.sensors.sessions.AbstractServerSocketSensorSession:106 - Not starting server socket, since port < 1
curre13:02:16,016 ERROR org.rifidi.edge.sensors.TimeoutCommand:70 - Timeout Exception on Sensor: Alien_2:IPSession: 127.0.0.1:20000 (PROCESSING), [Autonomous Session IPServerSession: 0 (CREATED)],[GPIO Session IPServerSession: 0 (CREATED)] Command: Alien Keep Alive
1
3:02:16,016  INFO org.rifidi.edge.sensors.sessions.AbstractSensorSession:197 - Queing command: CommandExecutor: Alien_Push_Start_1 IPSession: 127.0.0.1:20000 (CLOSED), [Autonomous Session IPServerSession: 0 (CREATED)],[GPIO Session IPServerSession: 0 (CREATED)]
1
3:02:16,016 ERROR org.rifidi.edge.sensors.sessions.ReadThread:90 - java.net.SocketException: Socket closed
1
3:02:16,031  INFO org.rifidi.edge.sensors.sessions.AbstractIPSensorSession:204 - Attempting to connect to : 127.0.0.1:20000
1
3:02:16,031  INFO org.rifidi.edge.sensors.sessions.AbstractServerSocketSensorSession:106 - Not starting server socket, since port < 1
1
3:02:16,048  WARN org.rifidi.edge.adapter.alien.commandobject.AlienGetCommandObject:72 - Something is wrong with the command: 
1
3:02:16,048  WARN org.rifidi.edge.adapter.alien.commands.internal.AlienPropertyCommand:77 - Alien Exception while executing command externalinput
1
3:02:16,048  INFO org.rifidi.edge.sensors.sessions.AbstractServerSocketSensorSession:106 - Not starting server socket, since port < 1
1
3:02:16,048  INFO org.rifidi.edge.sensors.sessions.AbstractSensorSession:328 - Session not in processing state. Command will be executed when session connects: 
1
3:02:16,048  WARN org.rifidi.edge.sensors.sessions.AbstractSensorSession:288 - Cannot wait on command  because the session is not in the processing state
1
3:02:16,048  WARN org.rifidi.edge.adapter.alien.Alien9800ReaderSession:166 - Cannot connect Alien GPIO Session: [GPIO Session IPServerSession: 0 (CREATED)]
o
rg.rifidi.edge.sensors.CannotExecuteException: The GPI command may not have executed
	
at org.rifidi.edge.adapter.alien.Alien9800ReaderSession.getExternalInput(Alien9800ReaderSession.java:410)

bppause
Posts: 425
Joined: Sat Oct 03, 2009 12:30 am
Organization: Pramari

Re: Not able to connect to Alien Emulator reader

Post by bppause » Wed Feb 24, 2016 11:56 pm

First it may be easier to follow same steps via dashboard (instead of commandline)

http://wiki.rifidi.net/index.php?title= ... _Dashboard

Plans are to update quick start guide to reference dashboard

prasanth
Posts: 15
Joined: Wed Feb 03, 2016 3:34 am
Organization: CDAC

Re: Not able to connect to Alien Emulator reader

Post by prasanth » Mon Feb 29, 2016 5:32 am

Hi,
Thanks for reply. Currently i am trying with the dash board. But the documents are not complete as you said.

1. When i start the session, tags are being displayed in emulator window. Is that the correct way rifidi works or, Can is there any to view the tag results in the dash board itself.

2. Very often i am getting this exception, and what can i do for avoiding this.

Code: Select all

14:43:43,184  INFO org.rifidi.edge.rmi.SensorManagerServiceImpl:368 - Session ali on Reader ali has started
14:43:43,184  INFO org.rifidi.edge.sensors.sessions.AbstractSensorSession:328 - Session not in processing state. Command will be executed when session connects: 
14:43:43,207  INFO org.rifidi.edge.sensors.sessions.AbstractSensorSession:328 - Session not in processing state. Command will be executed when session connects: 
14:43:43,207  WARN org.rifidi.edge.sensors.sessions.AbstractSensorSession:288 - Cannot wait on command  because the session is not in the processing state
org.rifidi.edge.sensors.CannotExecuteException: The GPI command may not have executed14:43:43,207  WARN org.rifidi.edge.adapter.alien.Alien9800ReaderSession:166 - Cannot connect Alien GPIO Session: [GPIO Session IPServerSession: 54322 (CREATED)]

	at org.rifidi.edge.adapter.alien.Alien9800ReaderSession.getExternalInput(Alien9800ReaderSession.java:410)
	at org.rifidi.edge.adapter.alien.gpio.AlienGPIOSession.initialize(AlienGPIOSession.java:92)
	at org.rifidi.edge.adapter.alien.Alien9800ReaderSession$2.run(Alien9800ReaderSession.java:162)
	at java.lang.Thread.run(Thread.java:745)
[{"displayName": "store_10_Miami","restProtocol" : "http","ipAddress" : "localhost","restPort" : "8111"}]14:43:50,175  INFO org.rifidi.edge.rest.SensorManagerServiceRestletImpl:611 - readers requested
14:43:50,191  INFO org.rifidi.edge.rest.SensorManagerServiceRestletImpl:1138 - readerTypes requested
14:43:50,195  INFO org.rifidi.edge.rest.SensorManagerServiceRestletImpl:1307 - apps requested
14:43:50,211  INFO org.rifidi.edge.rest.SensorManagerServiceRestletImpl:651 - readerStatus requested
14:43:50,233  INFO org.rifidi.edge.rest.SensorManagerServiceRestletImpl:1280 - commandTypes requested
14:43:50,241  INFO org.rifidi.edge.rest.SensorManagerServiceRestletImpl:1280 - commandTypes requested
3. Can i execute commands like "currenttags" in dashboard.

bppause
Posts: 425
Joined: Sat Oct 03, 2009 12:30 am
Organization: Pramari

Re: Not able to connect to Alien Emulator reader

Post by bppause » Mon Feb 29, 2016 2:41 pm

In the next release of Rifidi current tags will be included in dashboard

For now u can get current tags via http rest

http://wiki.rifidi.net/index.php?title= ... idi_3.4.29

Or edge console command line

Note we also plan to update the quickstart guide to be more Inline with dashboard


If you are still having issues also including screen shot of how reader ..session and commands are setup in dashboard would be helpful

prasanth
Posts: 15
Joined: Wed Feb 03, 2016 3:34 am
Organization: CDAC

Re: Not able to connect to Alien Emulator reader

Post by prasanth » Wed Mar 02, 2016 6:33 am

Hi

Thanks for reply. I tried via http rest, but no luck in reading tags. Reader status command is working. Image of following as u asked is uploaded along with.
1. currenttags for Alien_1
2. Reader setup image
3. Command setup image

Thanks again.
Attachments
1.JPG
currenttags for Alien_1
1.JPG (32.77 KiB) Viewed 2230 times
3.JPG
Command setup image
3.JPG (82.93 KiB) Viewed 2230 times
2.JPG
Reader setup image
2.JPG (96.03 KiB) Viewed 2230 times

bppause
Posts: 425
Joined: Sat Oct 03, 2009 12:30 am
Organization: Pramari

Re: Not able to connect to Alien Emulator reader

Post by bppause » Wed Mar 02, 2016 12:25 pm

Based on the screen shots its looking like the session is processing state/connected to reader but there is no command executing on the session (which is need to read tags)

Here is dashboard wiki on coammds
http://wiki.rifidi.net/index.php?title= ... d#Commands

prasanth
Posts: 15
Joined: Wed Feb 03, 2016 3:34 am
Organization: CDAC

Re: Not able to connect to Alien Emulator reader

Post by prasanth » Fri Mar 18, 2016 2:04 am

Thanks for the reply.
Problem was with the emulator version. Working fie with emulator version 1.5.3.

Thanks again

Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest